Voltage AC 90V-240V 50/60HZ

Power:3500W

Normal Heat-up Time 12min（3500W）

Electron Temperature Control 70℃~80℃

Water Consumption 10L (up to waterline)

Max Continuous Output Duration 5~6min

Max Output Coverage Around 200㎡

N.W. 10.5 kg

G.W. 11kg

Packing Size:49*45*4cm

Warning:

*Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product

*The product is for indoor use only (IP20) to prevent risk of fire or shock,do not expose the product to rain or moisture

*Always install the product in a location adequate ventilation,at least 20 in (50cm) from adjacent surface

*Be sure that no ventilation slots on the product’s housing are blocked

*Never connect the product to a dimmer

*Never Carry the product from the cord or any moving part

*The maximum ambient temperature(Ta) is 104F℉(40℃). Do not operate the product at higher temperatures

*In the event of a serious operating problem,stop using the product immediately

*Never try to repair the product.Repairs carried out by unskilled people can lead to damage or malfunction.Please contact the nearest authorized technical assistance center.

*Do not continue to use the machine once visibility is reduced 20”(50cm) or below

The area in front of the product may become wet during operation.Make sure not to use near smooth floors as they may become slippery

*Water temperature should be about 175℉(79℃) for optimal operation

*Keep this User Manual for future consultation.If you sell the product to another user,be sure that they also receive this document