Light source: 228x3W white LEDs (Strobe ) 64x 0.2w RGB LEDs (backlight) array
Minimum LED lifetime: 50 000 hours

Max. total output: 180 000 lumens*
Resolution:8 bits per color plus8-bit dimming

Dimming, above 16.7% output intensity: Current-controlled, flicker-free
Dimming, below 16.7% output intensity: PWM (refresh rate 6000 Hz)
Control systems: DMX
DMX channels: 3/4/14 Channels
Setting:Control panel with backlit monochrome display
N.G: 7kgs /pcs
Packing Size: 49x33x23cm (1pcs /carton)
51x35x49cm(2pcs/carton)
Flight case: 80x60x57cm (6pcs in 1 )

Effect:
The fixture has two LED arrays:
The Beam is a high-intensity array that gives powerful strobe and blinder effects

The Aura gives RGB effects that light up the front of the fixture to complement or contrast with the output
from the Beam.

Strobe effects :

The 3000 LED offers strobe effects from the Beam with variable flash rate, flash duration and
intensity. It also offers the following pre-programmed effects:
Ramp up/down intensity modulation effects
Random flashes
Lightning – simulates the instantly recognizable 'dirty' flash of a lightning strike
Spikes – low-intensity light output with high-intensity flashes.

Blinder effects:

To obtain a continuous blinder effect, set flash duration to a long value and flash rate to a high frequency
value so that flashes 'overlap' and merge into continuous light output.

Aura RGB Color :

Extended DMX mode gives control of the Aura. You can set Aura color with independent RGB control and
you can also control overall Aura intensity.
The four different dimming curve options available in the fixture's control menus apply to both the Beam and
the Aura dimming curves